Area Converter
Convert area between square meters, square kilometers, square feet, square yards, square miles, acres, and hectares. Enter an area, pick the unit you are converting from and the unit you want, and see the result instantly.
1 Square meters = 10.763915 Square feet
Who should use it: Real estate, agriculture, construction, and anyone comparing land or surface areas.
How to use this calculator
- 1Enter the area to convert.
- 2Choose the unit you are converting from.
- 3Choose the unit you want to convert to, or tap the swap button to reverse the direction.
- 4Read the converted value.
- 5Area factors are the squares of length factors, so they change quickly — double a side length and the area quadruples.
Understanding the inputs
| Value | The area to convert, in the "From" unit. |
| From unit | The unit your value is currently in. Supported units include square meters, square kilometers, square feet, square yards, square miles, acres, and hectares. |
| To unit | The unit you want the result in. Use the swap button to exchange "From" and "To" instantly. |
How the calculation works
Every area is first converted to a base unit (square meters) using an exact squared factor, then converted from square meters to the target unit. Because area factors are squares of length factors, they differ from the corresponding length factors — for example, 1 square foot = 0.092903 square meters.
Worked example
Scenario: Convert 1 acre to square feet.
Result: 1 acre = 43,560 sq ft.
How to interpret your result
The result is the same area expressed in a different unit. It is useful when a land or surface measurement is given in a system you do not normally use, such as a property listing in acres versus a floor plan in square meters. Because the conversion uses exact factors, the only loss of precision comes from rounding the displayed value.
Factors that can affect the result
- Unit system: metric units (square meters, square kilometers, hectares) and imperial units (square feet, square yards, square miles, acres) use different base definitions.
- Squared factors: area conversion factors are the squares of length factors, so they grow quickly — 1 acre = 43,560 square feet.
- Rounding: the displayed result is rounded; full precision is kept internally.
Limitations and assumptions
- Supports common metric and imperial area units; local units (such as ping or tsubo) are not included.
- Results are rounded for display, so very small or very large values may show limited precision.
- This tool converts area only; it does not compute length or volume, which use their own factors.
Frequently asked questions
Related calculators
Related guides
Methodology
All area units are defined by a fixed conversion factor to the square meter. The calculator multiplies the input by its unit's factor to get square meters, then divides by the target unit's factor to produce the result. Factors follow the international definitions for metric and imperial area units.
Sources and references
- NIST — Metric and SI unit conversions — authoritative metric and imperial area conversion factors
Disclaimer: Results are provided for informational purposes and may vary depending on the values entered, the assumptions described above, and rounding. They are not a substitute for professional advice specific to your situation. Read the full disclaimer.