Angle Converter

Convert angles between degrees, radians, gradians, and turns. Enter a value, pick the unit you are converting from and the unit you want, and see the result instantly.

0.017453

1 Degrees = 0.017453 Radians

Who should use it: Students, engineers, programmers, and anyone working with angles across mathematical and surveying units.

How to use this calculator

  1. 1Enter the angle to convert.
  2. 2Select the unit you are converting from.
  3. 3Select the unit you want to convert to, or tap the swap button to reverse the direction.
  4. 4Read the converted value.
  5. 5A full circle is 360 degrees, 2π radians, 400 gradians, or 1 turn — choose the unit that matches your field (radians for math, gradians for surveying).

Understanding the inputs

ValueThe angle to convert, in the "From" unit.
From unitThe unit your value is currently in. Supported units include degrees, radians, gradians, and turns.
To unitThe unit you want the result in. Use the swap button to exchange "From" and "To" instantly.

How the calculation works

Every angle is first converted to a base unit (degrees) using a fixed conversion factor, then converted from degrees to the target unit. A full circle is 360 degrees, 2π radians (about 6.283), 400 gradians, or 1 turn, so all units are linked through the circle.

value_in_degrees = value × factor_to_degrees; result = value_in_degrees ÷ factor_to_target

Worked example

Scenario: Convert 1 radian to degrees.

Result: 1 rad × 57.29578 ≈ 57.296°.

How to interpret your result

The result is the same angle expressed in a different unit. It is useful when an angle is given in a unit you do not normally use, such as a calculus problem in radians versus a compass bearing in degrees. Because the conversion uses fixed factors, the only loss of precision comes from rounding the displayed value.

Factors that can affect the result

  • Full circle: 360 degrees = 2π radians (≈ 6.28319) = 400 gradians = 1 turn, so all units are linked through the circle.
  • Conversion factors: 1 radian = 180/π ≈ 57.29578°; 1 gradian = 0.9°; 1 turn = 360°.
  • Rounding: the displayed result is rounded; full precision is kept internally.

Limitations and assumptions

  • Supports degrees, radians, gradians, and turns only; other units such as arcminutes, arcseconds, or mils are not included.
  • The radian factor (57.29578°) is a rounded value of 180/π, so very high-precision work may show tiny rounding differences.
  • This tool converts angle measures only; it does not compute trigonometric functions or angular velocity.

Frequently asked questions

Related calculators

Methodology

All angle units are defined by a fixed conversion factor to the degree, linked through the full circle (360° = 2π rad = 400 grad = 1 turn). The calculator multiplies the input by its unit's factor to get degrees, then divides by the target unit's factor. The radian factor uses 180/π ≈ 57.29578.

Sources and references

Last reviewed: August 2026. Read our editorial policy.

Disclaimer: Results are provided for informational purposes and may vary depending on the values entered, the assumptions described above, and rounding. They are not a substitute for professional advice specific to your situation. Read the full disclaimer.